[s-cars] By-pass vavle ?
Mike Sylvester
mike at urq20v.com
Thu Jan 13 04:57:49 PST 2011
I have one of the 034 BPV. The 1st one I received was defective. The
port on the side pulled out from the housing. In less than a year the
replacement's o-ring that seals the side port has dry rotted.
I replaced the BPV with an OEM for now until I install the Forge I
recently bought.
Mike
> -------- Original Message --------
> Subject: Re: [s-cars] By-pass vavle ?
> From: dgraber460 at aol.com
> Date: Wed, January 12, 2011 4:28 pm
> To: ekellock at gmail.com, quattro at audifans.com, s-car-list at audifans.com,
> urq at audifans.com
>
>
> I used to be. A Shrapnel knob was an added feature of the old 10V WRX, but that didn't use a bypass valve.
> Now I just use the boost levels Steve E built into the chip for the 3B (about 17-18). On the AAN it is as I bought it many years ago RS2'd and pulls 28 WOT in first and second.
> What are the OEM units built to handle?
> I noticed Javed 034 offers one for $99. Anyone testify to it's virtues? I think Javed and 034 does good business and makes good stuff.
>
> Dennis Graber
> 720-838-0558
>
>
>
> -----Original Message-----
> From: Ed Kellock <ekellock at gmail.com>
> To: dgraber460 at aol.com; quattro at audifans.com; s-car-list at audifans.com; urq at audifans.com
> Sent: Wed, Jan 12, 2011 11:52 am
> Subject: RE: By-pass vavle ?
>
>
> Are you a boost abuser? ;-P
> Ed
>
>
> ----Original Message-----
> rom: quattro-bounces at audifans.com [mailto:quattro-bounces at audifans.com] On
> ehalf Of dgraber460 at aol.com
> ent: Wednesday, January 12, 2011 8:32 AM
> o: quattro at audifans.com; s-car-list at audifans.com; urq at audifans.com
> ubject: By-pass vavle ?
>
> What is the conventional wisdom regarding the cleaning and (if any)
> ubrication of the aluminum by-pass valves? Any lube that won't interfere
> ith sensors etc or gum up with use? Maybe a graphite dry type?
> have a Forge AL valve that needs to be periodically cleaned, and if left
> ry seems to be have a little drag in operation. The machining and quality
> f this valve is very good and I might be getting another as I have 3 oem
> lastic valves that are all ruptured. I have seen posts where many listers
> ecommend the oem units, but they don't seem to hold up for me. TIA. Any
> dvice appreciated.
> Dennis
> enver
> ______________________________________________
> uattro mailing list http://www.audifans.com/mailman/listinfo/quattro
> ttp://www.audifans.com/kb/List_information
> o virus found in this incoming message.
> hecked by AVG - www.avg.com
> ersion: 9.0.872 / Virus Database: 271.1.1/3375 - Release Date: 01/12/11
> 0:38:00
>
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
More information about the S-CAR-List
mailing list