[s-cars] Interior Swap questions

[chris chambers]

Peter,

If I understand correctly you want to know how to move carbon fibre trim from 
one car to another, 
moving the trim from the door panels of one car to the door panels of the other, 
and then of course the dash pieces.

The trim clips into clips built into the door panels, you can press a phillips 
screwdriver into the clip next to the trim's pin which
will open the clip and allow you to remove the trim. The bigger pieces of trim 
have multiple pins so you will have to use this
procedure for each clip to remove the trim from the panel.

The dash pieces are a more difficult and the air bag piece is the worst. To 
remove the driver's side trim you will need to remove
the lower dash panels, they are held in with nuts. The airbag piece will require 
dropping the glove box and air bag to expose
the nuts. 

good luck
Chris



________________________________
From: Peter Dowker <pdowker at me.com>
To: S CAR List <s-car-list at audifans.com>
Sent: Sat, May 21, 2011 10:19:14 AM
Subject: [s-cars] Interior Swap questions

Gents (and ladies if any are present)

I am in process of pulling parts from the now retired 93 urS4 in preparation for 
the cosmetic upgrades that will be added to the new (to me) S-car.

As the newer car is a 95.5 with wooden panels, and I have the Carbon Fibre 
interior panels in the 93, I'd like to swap them.... but don't want to break 
them. Anyone have a link or advice on how to pull them out of the donor car?

Thanks in advance 

Cheers

Peter Dowker

"The price of freedom of religion, or of speech, or of the press, is that we 
must put up with a good deal of rubbish." - Robert  H. Jackson - Chief US 
Prosecutor at the Nuremberg Trials and United States Supreme Court Justice




_______________________________________________
S-CAR-List mailing list
http://audifans.com/mailman/listinfo/s-car-list
http://www.audifans.com/kb/List_information