[s-cars] motor mounts

[Stephen Marinello]

I went with the density mounts that Tom was considering; same ones that I put on my son's B6 A4 USP.

Sent from my iPhone

On Aug 29, 2012, at 7:56 PM, "Cody Forbes" <cody at 5000tq.com> wrote:

> Which 034 mounts are these? The density or the polyurethane? I had sort of
> burried the hatchet with Javad a bit ago and was thinking or doing one of
> his poly mounts. My 5ktq's drover side mount is 10 years old and going
> strong, but I kill a passenger side motor mount about once a year or more
> (this is the 500+hp 5ktq that gets launched often).
> 
> -Cody
> 
> -----Original Message-----
> From: s-car-list-bounces at audifans.com
> [mailto:s-car-list-bounces at audifans.com] On Behalf Of Stephen Marinello
> Sent: Wednesday, August 29, 2012 10:16 PM
> To: Steve Mills
> Cc: s-car-list at audifans.com
> Subject: Re: [s-cars] motor mounts
> 
> Sorry to hear that. Just put the 034 mounts on the avant last month. Seems
> to be mixed opinions; wish I'd heard the other side. They seem okay, but I'd
> hate to have to pay for labor to replace them again.
> 
> Sent from my iPhone
> 
> On Aug 29, 2012, at 11:36 AM, Steve Mills <s.b.mills at gmail.com> wrote:
> 
>> I wouldn't install 034's motor mounts if they were free- entirely too many
> reports of very early failure, and worse 034 pretending that no problem
> exists. 
>> 
>> As far as replacing the mounts, check the FAQ in the S4/S6 forum on
> quattroworld. The driver's side is pretty easy to get at, passenger is a bit
> more challenging. 
>> 
>> On Aug 29, 2012, at 12:49 PM, Martin Baggenstos
> <martin.baggenstos at gmail.com> wrote:
>> 
>>> Hello eveyone,
>>> 
>>> I have some worn out motor mounts that need replacement and was 
>>> wondering if anyone has a write up on how to replace them on a 95 S6. 
>>> They are actually polyurethane 034 motor mounts which have worn out over
> 5 years.
>>> Does that seem pretty quick to anyone. I am assuming that I could 
>>> drive the car up on a ramp and support the engine with a jack 
>>> underneath. I have changed the snub mount out before which is easy 
>>> but not the motor or transmission mounts, but from what I read, it 
>>> seems pretty simple and I am good with tools and have done other 
>>> mechanical work on the car before. Any advice would be appreciated.
>>> 
>>> Martin
>>> _______________________________________________
>>> S-CAR-List mailing list
>>> http://audifans.com/mailman/listinfo/s-car-list
>>> http://www.audifans.com/kb/List_information
>> _______________________________________________
>> S-CAR-List mailing list
>> http://audifans.com/mailman/listinfo/s-car-list
>> http://www.audifans.com/kb/List_information
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>