[s-cars] Thanksgiving Misadventure

[Keith Franchetti]

Oh, I see another option here:

http://www.efiexpress.com/catalog/product_info.php?cPath=15&products_id=66

Here is description, if you want to skip the link:
"1.8t UrS4/S6 plug and play coil kit $350.00
Another plug and play coil option for the 5 cylinder 20v turbo engine,
the 1.8t coilpack kit actually uses the coils from the later 2.0tfsi
motors (part number 07K 905 715F) which are taller and stronger than
the older 1.8t coils. Direct plug and play fit for the original S4/S6.
Will not fit the 7a or 3b valve cover without additional trimming. It
is not recommended to fit any form of cover over these coils to allow
them to cool as effectively as possible."


No cover???  I would put that aluminum plate back on?  Also this seems
to use different coils (based on part number) than the one Wylie
recommended, which is this one, I think:

https://www.apikol.com/#Products,Engine,21
This one uses coils with this part number:  06A 905 115D

Price is about the same.  This latter option not only does not say not
to put a cover on, but you can also order a stainless steel cover for
an extra $30.  Anyone seen that?  Worth it?

Oh, JC, I also found the Magnecor LS2 wires you mentioned.  I think.
$225.  But those don't seem set up to plug into anything.

Thanks again.

Keith