[s-cars] Igor camber plate discrepancy

[brian hoeft]

Hi list,

Hoping someone has some experience with this discrepancy. Igor sent me
these PDF's years ago and I've been procrastinating ever since.

I took a spare set of camber plates to my machinist this week to finally
get my camber correct and tire wear to an acceptable level.

While there, he pointed out a discrepancy I overlooked.

One of the PDF's shows the A1 holes having a 4mm offset and B1 with none.

The other shows the B1 holes having an offset of 4mm and A1 with none.

Initially I would think it more appropriate to offset the outer A1 holes,
but in between reading several court opinions, haven't really sat down and
given it a good look, so figure it's worth the ask to the list.

Thanks


-- 
*       -Brian*
      [blinders off&ear <http://208.53.138.125:8068/>plugs out]