[s-cars] OPR

[Cody Forbes]

They are impossible to balance accurately, but typically it turns out good enough. Don't bother with road force. You can remove the OPR with a heat gun with a flat scraper on it, but it's a PITA.

-Cody
(Sent from my phone, if a word doesn't fit blame Siri)

On May 21, 2012, at 7:53 PM, Lee Levitt <lee at wheelman.com> wrote:

> Folks,
> 
> A quick question...I have a set of Hoosier tires that need to be mounted, and two of them have a fair amount of OPR deposited on the tread.
> 
> Will these tires balance okay with the OPR, or should I remove it before mounting? If the latter, what's the best way of removing it?
> 
> BTW, it took me a bit to figure out what OPR meant...I'll save someone the trouble :) Other People's Rubber (picked up on the track).
> 
> Thanks!
> 
> Lee
> 
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information