[s-cars] any BTDTs removing UrS4 rear proportioning valve?

[Peter Schulz]

Chris:

its gonna take a lot more than just Kroil…like some sandblasting so I can figure out how it's attached to the rear subframe..

-Peter



On Aug 12, 2013, at 11:43 AM, chris chambers wrote:

> No BTDT, but I would highly recommend soaking it in Kroil prior to attempting to remove.
> 
>  
> 
> From: Peter Schulz <p.schulz at verizon.net>
> To: s-car list <s-car-list at audifans.com> 
> Sent: Monday, August 12, 2013 1:07 PM
> Subject: [s-cars] any BTDTs removing UrS4 rear proportioning valve?
> 
> I'm in the process of replacing the leaking fuel tank from my new to me black 1993 uRs4.
> I removed the rear subframe and tank from a parts car.  In the process I simply cut the rear brake lines.
> I won't be in the same position on the black UrS4. - I'd prefer to disconnect the valve and leave it suspended under the car when dropping the rear subframe and fuel tank.
> 
> Any BTDTs or worst case rust-free proportioning valves available if I have to cut off th sold one?
> 
> 
> -Peter Schulz
> Chelmsford Ma, USA
> http://www.naaclub.org/
> 
> 1995.5 S6 Avant Emerald/Ecru
> 1995.5 S6 Avant Silver/Platinum
> 1993 S4 Silver/Black (parts car)
> 1993 S4 Black/Black
> 1994 S4 Silver/Black
> 1991 CQ Silver/Black
> 1991 CQ Silver/Platinum (eS2 recipient) 
> 
> 
> 
> 
> 
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
> 
>