[s-cars] front control arm bushings '95 S6

Tom Green trgreen at comcast.net
Mon Nov 17 16:18:37 PST 2014


This link from the Quattroworld UrS4/6/S2/RS2 forum FAQ has a parts  
breakdown as well as other information.  The #11 bolts that fit  
through the #10 sleeves
to secure the control arm inner attachment to the subframe and the #14  
bolt, #15 nut that secures the ball joint on the control arm outer end  
to the strut housing and
#8 sway bar nut are the must replace hardware parts on the lower  
suspension.  I didn't mean to include the #10 sleeves as they don't  
need replacing unless you can't
remove them undamaged.  The control arm is captured until you remove  
the sleeves.  There is a lot of discussion on the QW forum about this  
issue that you can find
using the search tool there .  Much of it will be in the FAQ already.   
The Blau price is probably so high because they sourced the sleeves  
from the Audi genuine parts
at a dealer.  These are ~ $25 each and #11 is ~ $7.50 ea.  Regardless,  
I don't like Blau or Meyle as a source for critical parts since you  
don't know the source, but can be
sure some come from India or China with suspect material testing and  
hardness specs.  You can do better by using the parts numbers provided  
and ordering online from genuineaudiparts.com (San Diego Audi online  
parts) or Milburn Audi if you can still get registered for Carson  
Heter's prices.  This probably takes a week of lead time to receive  
parts so it requires advance planning.

http://forums.quattroworld.com/s4s6/msgs/24392.phtml

Hang on to that link for the FAQ information on torque specs that you  
will need later.

Tom


On Nov 17, 2014, at 6:06 PM, Jeremiah Curry wrote:

> ouch.   I found this: http://www.blauparts.com/proddetail.asp?prod=MA11902%2DC 
>  but that is a lot of cash for some bolts that were included in the  
> Mayle kit.
>
> -----Original Message----- From: Jeremiah Curry
> Sent: Monday, November 17, 2014 3:44 PM
> To: James Murray ; Tom Green ; s-car-list at audifans.com
> Subject: Re: [s-cars] front control arm bushings '95 S6
>
> thanks, I bought the TRW...no dealer within 200 miles though :(
>
> -----Original Message----- From: James Murray
> Sent: Monday, November 17, 2014 3:39 PM
> To: Jeremiah Curry ; Tom Green ; s-car-list at audifans.com
> Subject: RE: [s-cars] front control arm bushings '95 S6
>
> I would imagine the dealer, unless there's a separate kit for that,  
> but I've
> never heard of one. The TRW have a reputation for lasting, while the  
> Meyle
> don't.
>
> /Jamu



More information about the S-CAR-List mailing list