[s-cars] Windshield Washer

[Robert Rossato]

The hose is 6mm OD by 1mm wall thickness.  This stuff should work.
https://www.belmetric.com/rhpoly4-polyamide-hard-plastic-p-943.html?zenid=un4vfmh81ao674b54fqe14p465&cPath=14_184

or potentially this if a rubber line will work instead, but think that the factory piece is more of a plastic line.
https://www.belmetric.com/rhbmw-black-silicone-hose-p-933.html?zenid=un4vfmh81ao674b54fqe14p465&cPath=14_137

Also, keep in mind that there are some sleeves that are used between the hose and the pump and the washer nozzles.  You may need to replace those as well.

893 955 665 angled piece at base of pump
443 955 665 straight connector between hose and check valve at washer nozzle.

Bob



> -----Original Message-----
> From: S-CAR-List [mailto:s-car-list-bounces at audifans.com] On Behalf Of Paul
> Luevano
> Sent: Tuesday, October 07, 2014 11:34 AM
> To: s-car-list
> Subject: [s-cars] Windshield Washer
> 
> List-
> 
> 	My windshield washer reservoir seems to be leaking.  I'm not sure from
> where yet, but I want to have all the parts I need in hand before I dig
> in.   It *seems* to be leaking right from the pump.   If I order:
> 
> http://www.amazon.com/gp/product/B008KNBTZO/ref=ox_sc_act_title_2?ie=UTF8
> &psc=1&smid=ATVPDKIKX0DER
> 
> 	and #'s 20, 21, and 22 from:
> 
> http://genuineaudiparts.com/parts/1995/Audi/S6/index.cfm?action=partDetail&secti
> on=BODY%20HARDWARE&group=WINDSHIELD&subgroup=WIPER%20%26%20
> WASHER%20COMPONENTS&component=Washer%20pump%20seal&partnumber
> =443955465&vehicleid=72587&siteid=214407
> 
> 	I should have all bases covered, right?
> 
> 	Also, anyone know what diameter hosing is used for the windshield
> washer?  Mine just disintegrated when I was poking around.  I'd like to
> replace the whole length while I'm in there.
> 
> 	Thanks much!
> 
> Paul Luevano
> Wakefield MA
> 
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information