[s-cars] MAF to Turbo hose recommendations

Darin Nederhoff scarsgo at gmail.com
Mon Apr 24 15:51:23 PDT 2017


Funny you should ask this as I've been wrestling with installing the $%^&
 2Bennett hose.

Stock:  Expensive (if even available?) but it fits great and does hold up
well for most applications
034:  Expensive and a bit flimsy feeling but installs easily.  It almost
feels as if it would collapse on itself though... not even as rigid feeling
as the stock hose.
2B:  Thick and not flexible.  Less expensive than 034 but fitment has been
a royal pain in the backside.  I had to trim the MAF end of my hose a bit
just to get the lower portion to go onto the turbo.  Impressed by the
bullet proof construction but the fitment was straight up garbage without
re-cutting.  (At least in my experience)

My local NAPA store had some nice stainless t-bolt clamps as does Amazon
etc.



On Mon, Apr 24, 2017 at 4:39 PM, <jim at almgt.com> wrote:

> Hey all,
>
> Finally time to get a new MAF to Turbo hose after the used one I was able
> to get finally cracked to the point of no return over the weekend.  Was
> able to cut off the area around the Turbo mounting, but this is by far a
> temporary solution.  Not wishing to pay the $250 for the dealer part,
> wondering if the 2Bennett hose is still the aftermarket favorite?  I’ve
> heard mostly good things about it, maybe a little tough to install but
> otherwise more solid than the 034Motorsports option.  Any updated opinions?
>
> Also, looking to update the hose clamps associated with the same hose….any
> recommendations?  Thanks!
>
> Best regards,
>
> Jim Fleischer
> ’95 urS6 avant
> 209K
> _______________________________________________
> S-CAR-List mailing list
> http://audifans.com/mailman/listinfo/s-car-list
> http://www.audifans.com/kb/List_information
>



-- 
Darin Nederhoff
Plymouth, MN


More information about the S-CAR-List mailing list