[urq] Re: ABS problem on Urq

[Phil Payne]

> Somewhere in the work you've done one or more of the sensors has been
> disturbed and now the ABS unit isn't seeing the same level of signal from
> each sensor.
> Could also be due to dirt/dust/rust etc on the cv joint teeth.
>
> Sometimes simply resetting the sensors works, other times you have to clean
> the cv joint teeth and reset the sensors. If the teeth are badly corroded
> the it's time for new joints.

And the "chisel end" of the sensor must be parallel to the teeth on the hub - it's easy to
twist it round on removal.

--
  Phil Payne
  http://www.isham-research.com
  +44 7785 302 803