[urq] knock sensor unit on WR engines?

Martin Pajak Martin at quattro.ca
Wed Nov 26 07:01:28 EST 2003


Justin,

For proper operation you need a unit that can retard the timing under boost... any normally aspirated unit does not have that capability.
Your best bet unfortunately is to use the timing/ignition unit from a 5kt (MAC11).
I know of couple of folk who have tried to use NA ignition units on turbo but IMO it's not worth it and defeats the safety purpose of the excersise.

HTH
Martin

---------- Original Message ----------------------------------
From: "Justin" <cbrooks22 at cox.net>
Reply-To: Justin <cbrooks22 at cox.net>
Date:  Tue, 25 Nov 2003 21:13:57 -0800

>Hello all, 
>I'm currently trying to implement a knock sensing unit on my WR engine...(cause I plan to make some mods, and I want to keep things safe...).  The cheapest way I can see to do this, it to use the knock sensor and knock sensor unit from the 85-87 4k 4cyls. 
>Could this be done safely, without conflicting with the normal timing operation of WR ignition control unit?
>
>Any thoughts or advice are always appreciated, :)
>Justin Church 
>84 turbo converted 4kq (WR)  
>_______________________________________________
>urq mailing list
>urq at audifans.com
>http://www.audifans.com/mailman/listinfo/urq
>


More information about the urq mailing list