[urq] knock sensor unit on WR engines?

[Bruce Bell]

The WR's 5th cyl. would confuse the 4 cyl. electronics. I think the 87.5
NF coupes had a separate Knock sensing unit; however then Martin's
appropriate comments apply. Your might consider either the electronics
from an MC/MB or purchase an aftermarket unit from a place like J&S.
I'd talk to Javad about an efi solution if I were going that far.

Bruce

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
Behalf Of Justin
Sent: Tuesday, November 25, 2003 10:14 PM
To: urq at audifans.com
Subject: [urq] knock sensor unit on WR engines?

Hello all, 
I'm currently trying to implement a knock sensing unit on my WR
engine...(cause I plan to make some mods, and I want to keep things
safe...).  The cheapest way I can see to do this, it to use the knock
sensor and knock sensor unit from the 85-87 4k 4cyls. 
Could this be done safely, without conflicting with the normal timing
operation of WR ignition control unit?

Any thoughts or advice are always appreciated, :)
Justin Church 
84 turbo converted 4kq (WR)  
_______________________________________________
urq mailing list
urq at audifans.com
http://www.audifans.com/mailman/listinfo/urq