[urq] First of many urq questions (food for thought..)

[Brandon Rogers]

the sensor just "senses" the pin, through magnetics, I believe, and therefore a signal is sent with each pass of the timing pin.  It's up the computer to know where on the flywheel the pin is located and therefore send ignition signal at appropriate time.  The WX computer assumes one location, an MC computer assumes another.  I don't know what each is.  If you are saying that different sensor locations account for different pin locations,((i.e. if you use an MC flywheel and move the sensor to the MC's sensor position (I have no idea if it's any different??) negating any timing pin location difference).. that I have no idea...

Brandon

  ----- Original Message ----- 
  From: Ben Swann 
  To: Brandon Rogers ; cbrooks22 at cox.net ; allan at physics.umn.edu 
  Cc: urq at audifans.com 
  Sent: Tuesday, April 06, 2004 8:39 AM
  Subject: Re: [urq] First of many urq questions (food for thought..)


  Don't the timing pins for the WX report the same signal as the MC ones?  The sensor may be located differently, but the pin is as well which ends up sending the same signal - I think.  I have not compared the flywheels to see if the pin is offset by the correct angle.

  Anyone know?

  Ben

  [Date: Mon, 5 Apr 2004 09:41:12 -0600
  From: "Brandon Rogers" <brogers at terrix.com>
  Subject: Re: [urq] First of many urq questions (food for thought..)
  To: "Urq List" <urq at audifans.com>
  Message-ID: <008401c41b24$6ce472a0$0b01a8c0 at terrixden>
  Content-Type: text/plain; charset="iso-8859-1"

  I think this option, if feasible, would also require some customized
  software, in that the MC and WX have timing pins with diferent locations on
  the flywheel.....

  Brandon
  ----- Original Message ----- 
  From: "Justin" <cbrooks22 at cox.net>
  To: ">" <urq at audifans.com>
  Sent: Friday, April 02, 2004 9:17 PM
  Subject: Re: [urq] First of many urq questions (food for thought..)


  > Oh, there is a spot on the WR which treads perfectly for the KS.  I tested
  > it with a MC harness that I have...I will send you a pic tommorow...
  > Justin
  > ----- Original Message -----
  > From: "Graham Allan" <allan at physics.umn.edu>
  > To: <urq at audifans.com>
  > Sent: Friday, April 02, 2004 7:12 PM
  > Subject: Re: [urq] First of many urq questions (food for thought..)]