[urq] ABY wireing for URQ

Thu Apr 8 16:26:18 EDT 2004

Thanks again all for your help.  So my urq is a late loom 84 car.  Thanks 
Jim you details are completely correct.  I will check to see what my local 
dealer has in the way of manuals.  So I am sorted out with the ABY wiring 
from the s2forum web site.  Now I am sorted with the URQ diagrams from Phil 
Payne’s site.  Your site is brill Phil.  I had seen it before, but somehow 
had missed most of it.  I will blame it on the slow connection at home.  But 
I had a look at it in work today and I am amazed at the work you have put 
into your site.  Thanks big time!

I downloaded loads of stuff just need to print it and make sense of it.  I 
won’t be starting this project for a few months but this is a great start.  
Thanks all for you help.  I will keep you informed of my progress or the 
lack their off.  Des.

>From: "desmond auld" <desauld at hotmail.com>
>To: quattro at audifans.com, urq at audifans.com, 
>es2 at audifans.com,Audi20V_Kruemmer at egroups.com, 
>seiche at shadetreesoftware.com,bklumper at mdbworld.com, 
>jim_haseltine at ntlworld.com, tlum at flash.net
>Subject: [Es2] ABY wireing for URQ
>Date: Wed, 07 Apr 2004 21:37:34 +0100
>MIME-Version: 1.0
>X-Originating-IP: [195.92.168.169]
>X-Originating-Email: [desauld at hotmail.com]
>X-Sender: desauld at hotmail.com
>Received: from audifans.com ([64.213.108.35]) by mc2-f9.hotmail.com with 
>Microsoft SMTPSVC(5.0.2195.6824); Wed, 7 Apr 2004 13:38:16 -0700
>Received: from localhost (localhost [127.0.0.1])by audifans.com (Postfix) 
>with ESMTPid 9D86EAF397; Wed,  7 Apr 2004 16:37:43 -0400 (EDT)
>Received: from audifans.com ([127.0.0.1]) by localhost (gentoo [127.0.0.1]) 
>(amavisd-new, port 10024) with LMTP id 12627-04-3; Wed,  7 Apr 2004 
>16:37:42 -0400 (EDT)
>Received: from gentoo.audifans.com (localhost [127.0.0.1])by audifans.com 
>(Postfix) with ESMTPid 48661AF3C4; Wed,  7 Apr 2004 16:37:42 -0400 (EDT)
>Received: from localhost (localhost [127.0.0.1])by audifans.com (Postfix) 
>with ESMTPid 1709BAF397; Wed,  7 Apr 2004 16:37:40 -0400 (EDT)
>Received: from audifans.com ([127.0.0.1])by localhost (gentoo [127.0.0.1]) 
>(amavisd-new, port 10024) with LMTPid 12627-04-2; Wed,  7 Apr 2004 16:37:39 
>-0400 (EDT)
>Received: from hotmail.com (bay7-f114.bay7.hotmail.com [64.4.11.114])by 
>audifans.com (Postfix) with ESMTPid A8085AF33A; Wed,  7 Apr 2004 16:37:38 
>-0400 (EDT)
>Received: from mail pickup service by hotmail.com with Microsoft 
>SMTPSVC;Wed, 7 Apr 2004 13:37:38 -0700
>Received: from 195.92.168.169 by by7fd.bay7.hotmail.msn.com with HTTP;Wed, 
>07 Apr 2004 20:37:34 GMT
>X-Message-Info: UZmYcfFpTCeCsWOSgW+2A7JBwORbSeiC
>X-Original-To: es2 at audifans.com
>Delivered-To: es2 at audifans.com
>Message-ID: <BAY7-F114jSeKg1bzuD00002dba at hotmail.com>
>X-OriginalArrivalTime: 07 Apr 2004 20:37:38.0023 
>(UTC)FILETIME=[2A3ED770:01C41CE0]
>X-Virus-Scanned: by amavisd-new at gentoo
>X-BeenThere: es2 at audifans.com
>X-Mailman-Version: 2.1.3
>Precedence: list
>List-Id: How to install a 20vt engine into your 90q/CQ <es2.audifans.com>
>List-Unsubscribe: 
><http://www.audifans.com/mailman/listinfo/es2>,<mailto:es2-request at audifans.com?subject=unsubscribe>
>List-Archive: <http://www.audifans.com/pipermail/es2>
>List-Post: <mailto:es2 at audifans.com>
>List-Help: <mailto:es2-request at audifans.com?subject=help>
>List-Subscribe: 
><http://www.audifans.com/mailman/listinfo/es2>,<mailto:es2-request at audifans.com?subject=subscribe>
>Errors-To: es2-bounces at audifans.com
>X-Virus-Scanned: by amavisd-new at gentoo
>Return-Path: es2-bounces at audifans.com
>
>Thanks all for your feed back on the Aby to URQ wiring and conversion.  The 
>www.s2forum web site has some very good diagrams for the aby/adu engine 
>side loom and ecu.  I am relatively happy with those diagrams and hopefully 
>that side should go well.
>
>What I plan on doing is to get everything connected and mocked up on the 
>floor and get the engine running there.  Then I can check with vag com that 
>all sensors are ok and I have no fault codes bugs.  This is the way I got 
>my tdi engine running in my A2 golf.  The tdi has lots more wires than the 
>ABY as it has a drive by wire throttle, electronic fuel pump etc, etc, so 
>wiring doesn’t scare me.  And im also an electronic engineer.
>
>
>The only problems I can see is on the 84 WR side.  As it’s an 84, then it 
>is even worse than other URQ’s as it is more of a miss match or wires, and 
>looms etc.  I haven’t looked much at the URQ wiring yet, but on first 
>inspection it isn’t great.  There are wires spliced into the top side of 
>the fuse box where the fuses are.  The fuel pump relay is bypassed somehow, 
>as the pump runs as long as the ignition is on.  I notice the wastage has 
>been adjusted…   Then the stupid digital dash has gone on the blink.
>
>So I need more info on the UR wiring.  The vin no of the car is 
>wauzzz852ea901061. Can anyone tell me if this is a early 84 loom car or 
>what?  What are the best books to get for this car?  I have Haynes manuals 
>for audi 100-200 and 80-90 coupe.  These don’t cover much.  Steve, the red 
>Bentley manual for the US 4000(80), CGT, that you mention, is it readily 
>available and if so where from?  How can I get a copy of the factory 
>diagrams even if they are not completely correct?
>
>Ok thanks to all involved for the help so far. Des.
>
>_________________________________________________________________
>Express yourself with cool emoticons - download MSN Messenger today! 
>http://www.msn.co.uk/messenger
>
>_______________________________________________
>Es2 mailing list
>Es2 at audifans.com
>http://www.audifans.com/mailman/listinfo/es2

_________________________________________________________________
Tired of 56k? Get a FREE BT Broadband connection 
http://www.msn.co.uk/specials/btbroadband