[urq] RE: [Es2] fuel pump
James Howard
spam.me1 at ntlworld.com
Tue Aug 10 16:07:00 EDT 2004
True, Flow rate is the important measure. Pressure is only a measure of the
pumps ability to overcome a restriction. The stock WR (WX) fuel system tops
out at about 240 Bhp, so although the maximum pressure which the WR pump can
deliver is 8 bar, it may not be able to supply the flow rate required by a
high(er) bhp 20V.
Having said all that, it's probably ok bearing in mind the redundancy in the
WR system, a pulsed injection system in the AAN and a similar capacity/bhp
to the WR.
Jim.
----- Original Message -----
From: "Mike Sylvester" <msylvester at verizon.net>
To: <urq at audifans.com>
Sent: Tuesday, August 10, 2004 6:17 PM
Subject: [urq] RE: [Es2] fuel pump
> At what flow rate?
> If you had an open hose it could only do 1 bar.
>
> Mike Sylvester
>
> ------------------
>
> AAN is only 3 Bar,I have no idea about the RS, it maybe 3.2 for the RS the
> urq pump can do 8 bar no problem.Bill
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question? Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>
More information about the urq
mailing list