[urq] 944 intercooler install

[Rich Letsinger]

It's an RS2 turbo so 21 PSI shouldn't be too far out
of it's efficiency range.  I totally agree that upping
to a K26/27 or T3/T04 would bring temps down.  But I'm
trying to find that mythical balance between low-end
spool, mid-range torque and high-end power.

Besides working on the ducting around my 2Bennett
intercooler, I'm about to try water injection.  Not
misting the outside of the intercooler, but the
Aquamist setup of injecting atomized water into the
intake tract right after the intercooler.

Rich

--- AudiQtroCp at aol.com wrote:

> I would wholeheartedly agree with Ingo that you are
> over-running your turbo  
> (especially if its a K24 @21psi).  In this case you
> are asking your  
> intercooler to do something it wasnt made for -
> compensate for a heatsoaked  turbo 
> rather than cooling the intake charge.
>  
> sean
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans
> Knowledgebase!
>
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding
> to the KB ... all contributions welcome!
> 



		
__________________________________
Do you Yahoo!?
Yahoo! Mail Address AutoComplete - You start. We finish.
http://promotions.yahoo.com/new_mail