[urq] Cruise control vacuum+electrical switch removal

[Tony Lum]

At 11:52 AM 12/10/2004, Andrew Finney wrote:
>I didn't know. Well, guess what I'm getting on my next trip to the
>yard. I assume the '85 and later use a different style switch, right?
>Thanks.
>
>Andrew.

The newer ones have a square body and are easier to disassemble and 
clean.  The old round style is held together by 800 (just kidding ;) 
interlocking teeth and are a bitch to get apart.  Once apart, you clean the 
switch contacts with DeOxit5 or similar, then clean and lube (I use 
silicone vacuum grease) the O ring on the plunger.  I've seen 100 ohms on 
the switch contacts.  Should be < 0.5 ohms.

Tony