[urq] Suspension rebuild continues

[Pasqualoni, James E]

Thanks Brandon.  I was considering the 84-85 springs, but I am concerned
about clearance, as I'm running 8 in R-8's, and my fenders aren't rolled.
Any advice on this fitment?

Cheers,
Jim

-----Original Message-----
From: Brandon Rogers [mailto:brogers at terrix.com] 
Sent: Friday, December 17, 2004 11:36 AM
To: Pasqualoni, James E; urq at audifans.com
Subject: Re: [urq] Suspension rebuild continues


Good call on the Bilsteins - great performance - and most on this List with
them will agree.  As for the springs, no advice except maybe a suggestion -
if you can't find '83 springs how about '84 or '85 - they lower the car
about an inch and are still factory spec....

Brandon
'84 ur

----- Original Message ----- 
From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
To: <urq at audifans.com>
Sent: Friday, December 17, 2004 8:59 AM
Subject: [urq] Suspension rebuild continues


> Good Morning All,
>
> The rebuild of the oe 83 rear suspension is coming along.  The current
plan
> is to replace oe-spec springs and use Bilstein HD's.  I am looking to 
> see
if
> anyone has had any luck sourcing new oe-spec coil springs for a 83?  I
read
> in the archives that at least one lister is using springs from 
> Suspension Techniques, but I can't find a listing for a part/product 
> number.
>
> Any recent BTDT?
>
> TIA (once again),
> Jim
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: 
> http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!