[urq] 3b / aan Conversion hose, radiator shroud

[Mike Sylvester]

wrt the hose...
I am a little concerned about the description:

"This is the hose that connects the water manifold on the head to the top of the radiator. This is the hose you will need if you are converting your Uri to a 20vt motor. It will work with either early (3B) or late (AAN,ABY,ADU) motors in any type85 chassis."

The 20vt urq had the RR engine.  I believe that the RR engine uses the same water manifold as the 3B.  
The AAN water manifold is completely different and will not accept the hose from the 3B.
However the 3B water manifold will not fit the AAN engine if the stock AAN intake manifold is used.

In any case, I would verify the p/n in ETKA before bidding just to be sure it is in fact for the RR engine.

Mike Sylvester

-------------------------
Found these on ebay:

http://motors.search.ebay.com/_W0QQgotopageZ1QQsassZquattrosportsusaQQso
recordsperpageZ50QQsosortpropertyZ1


No affiliation, yada yada, yada, but I have bought things from this
seller before...very good to deal with.

 

-Justin R.