[urq] RE: Turn Signal Problem
Chaplen, John
John.Chaplen at mercer.com
Wed Dec 29 16:30:05 EST 2004
I have pulled the plug that connects to the turn signal rocker, And
directly jumped/grounded both left and right signals and all I still get
is the green arrows solid, so I don't think it's the lever/rocker on the
steering column...
But question, if a ground was say bad in the right front signal, would
it stop both sides from working? or just the right side? I have not yet
checked the grounds on front lights yet.
John Chaplen CNE
Mercer Human Resource Consulting
111 SW Fifth Avenue, Suite 2800
Portland, OR 97204-3693
USA
phone: +1 503 273 5958
fax: +1 503 273 5999
mailto:john.chaplen at mercer.com
www.mercerHR.com
-----Original Message-----
From: CARDCONSYS at aol.com [mailto:CARDCONSYS at aol.com]
Sent: Wednesday, December 29, 2004 1:19 PM
To: Chaplen, John
Cc: urq at audifans.com
Subject: Turn Signal Problem
I have had exactly this problem and it turned out to be a
mechanical problem with the flasher/hazard switch not making proper
contact when in the normal position. The turn signal indicators are
wired through the flasher/hazard switch and will not function correctly
if it is not working correctly. Try deliberately pulling the switch
rocker back towards the off position.
Martin Dapot
__
**********************************************
This e-mail and any attachments may be confidential or legally
privileged. If you received this message in error or are not the
intended recipient, you should destroy the e-mail message and any
attachments or copies, and you are prohibited from retaining,
distributing disclosing or using any information contained herein.
Please inform us of the erroneous delivery by return e-mail. Thank you
for your cooperation.
**********************************************
FE01
More information about the urq
mailing list