[urq] Tubular contro arms, any interest??

[Daniel Jones]

Martin,

I would be interested, I would be looking for a larger adjustment in both
directions for camber. I am at about -1.2 deg per wheel and would like to
get closer to -0.5 or -0.75 deg. I would also want the ability to use a
rubber bushing for the inner mounts. Needle bearings are a little harsh for
New England roads.

Thanks,

Dan Jones
85 urq
86 5ktqa
98 a6qa (hers)

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com]On
Behalf Of Martin Pajak
Sent: Wednesday, February 11, 2004 10:10 AM
To: urq at audifans.com
Cc: quattro at audifans.com
Subject: [urq] Tubular contro arms, any interest??


Hi guys,

I am in process of designing some tubilar control arms for the type-81,
type-85 and type-89 cars.
The control arm would include provisions for stock sway bar, custom sway
bar, suspension link a'la rally cars and rose joint type ball joint.
The arms could use OEM, "hard" or needle bushings.
Also, this would eliminate the now almost impossible to find stock ball
joints..
Obviously wide veriaty of materials can be used depending on price.

Let me know if you are interested and possibly how much you would be willing
to pay for such bolt on kit (per axle).

Thanks in advance.
Cheers
Martin Pajak
www.quattro.ca
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!