[urq] 92-94 S4/S6/V8 rear Calipers

[Martin Pajak]

I just use vice grips... if you catch on the outside and avoid the rubber boot it works retty good....

HTH
Martin Pajak
www.quattro.ca


---------- Original Message ----------------------------------
From: CARDCONSYS at aol.com
Date:  Tue, 17 Feb 2004 22:45:10 EST

>        I have acquired a set of s4/S6/V8 rear Girling calipers to install on 
>my 83 UrQ. Can anyone please tell me how the cylinders should be retracted, 
>for handbrake adjustment, as there are not the usual VW/Audi large hex key 
>recesses but only a pair of triangular 'notches' diametrically opposed on the 
>circumference of the cylinders? Is there a recommended VW/Audi/Girling tool or do 
>I need to make my own?
>       Martin Dapot
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>