[urq] exaust leak?

[Jason E]

It was 12mm, and that did the trick.

I'm sure you can understand how relieved I am to know its just a nut.

Thanks a ton
Jason

----- Original Message ----- 
From: "Mike Fitton" <rfitton at vt.edu>
To: "Jason E" <jason at omglol.com>
Sent: Wednesday, February 18, 2004 2:58 PM
Subject: Re: [urq] exaust leak?


> cracked manifolds are common, but i've heard more than once of the
> front-most nut that holds it on backing off.  i have to tighten mine up
> about once a month, or it sounds just like a bad lifter when it's cold.
>   you can just get to it with a 13mm (i think) wrench.
>
> Mike
>
> Jason E wrote:
> > What is the most likely place for an exaust leak to be if its sounding
like it has noisy lifters.  Kinda sounds like  "clack clack clack clack"
> >
> > This is on a WX engine.
> >
> > Jason
> > _______________________________________________
> > Audifans urq mailing list
> > Send posts to: mailto:urq at audifans.com
> > Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
> > Have an urq question?  Check the Audifans Knowledgebase!
> > http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> > Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
> >