[urq] Wheel fit? A6

[Mike Del Tergo]

Dennis,
You've got it 1/2 right (the smaller the number, for the same rim, the more 
it sticks out).  Offset refers the the distance from the centerline the hub 
mating surface is.  0 offset means mating surface isaligned the centerline 
of the rim.
Any positive number = offset toward the outside of center,  (front wheel 
drive, 4 wheel drive and newer rear drives) any negative number = offset 
toward brake side.  (deep dish rims etc)
All else being equal rim diam, width etc, the lower the offset the more the 
rim appears to "stick out" from the hub.
HTH
Mike

> > 45mm I believe, the 200 20v with UFOs were 35
> > 29MM should work, will seriously fill the wheel well so
> > check fender clearances.
>
>Having only seen the numbers refernced but not any other info, I'm assuming 
>"offset refers to it's protrusion _inward_ toward the chassis", meaning the 
>smaller the number the farther "out" it sets?
>
>Dennis
>Denver

_________________________________________________________________
High-speed users—be more efficient online with the new MSN Premium Internet 
Software. http://join.msn.com/?pgmarket=en-us&page=byoa/prem&ST=1