[urq] Wheel fit? A6?

[Wolff]

You gotta watch that front tie rod end when the offset goes in a lot. 29
sounds pretty good for an 8" though. It does depend on the shape of the tire
a bit too.
HTH,
Wolff
----- Original Message ----- 
From: "Steve Eiche" <seiche at shadetreesoftware.com>
To: <DGraber460 at aol.com>; <urq at audifans.com>
Sent: Tuesday, January 27, 2004 8:51 AM
Subject: Re: [urq] Wheel fit? A6?


> Dennis,
> The wheels should fit fine.  Stock ur q 15x8 Ronals are ET24.  The higher
ET will bring them in 5mm, so they are more likely to fit a car without
rolled fenders.
>
> Steve
>
> Does anyone know if a 16X8 wheel with 29mm offset will fit an URQ? Isn't
stock 35?
> Also I have a 98 A6Q 2.8 that for the life of me I cannot find the fill
plug for the rear diff. Any BTDT (warnings) for replacing the seals on the
rear diff on one of these?
> TIA.
>
> Dennis
> Denver
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an Audi question?  Look for your answer in the Audifans
Knowledgebase!
> http://www.audi-quattro.org/kb ... all contributions welcome!
>