[urq] Vacuum Lines Mix Up

[Jim Haseltine]

Might be helpful.
http://homepage.ntlworld.com/jim_haseltine/quattro/tech/wr_vacuum_2.html


----- Original Message ----- 
From: "Paul Caouette" <pacdev at lycos.com>
To: <urq at audifans.com>
Sent: Sunday, January 18, 2004 5:55 PM
Subject: [urq] Vacuum Lines Mix Up


>
> Folks,
>
> Folks,
>
> I've done a stupid thing. I was replacing the vacuum lines on my '83 tqc
and was too quick in pulling lines (and too slow on the memory of how they
were connected. I took a tstab at it but the car won't start and it feels
like a big time vaccum leak so I'm assuming I done some incorrect plumbing.
>
> I have the URQ Service book with the diagram(s) but can't really make
sense of it.
>
> I'm attaching a Word doc with pictures of the two items I'm trying to
reconnect. One is the vacuum valve that sits behind and somewhat below the
intake manifod and the other is a selenoid vavle that mounts on the firewall
just aft of the intake mainfold.
>
> Could any one of you tell me what line goes to where? I took the time to
label the lines and the various fittings to make it easier.
>
> Any help will be appreciated
>
> Thanks
>
>
>
> ---
> Paul Caouette
> Denver, Colorado
>
>
>
>
> ____________________________________________________________
> Get advanced SPAM filtering on Webmail or POP Mail ... Get Lycos Mail!
> http://login.mail.lycos.com/r/referral?aid=27005


----------------------------------------------------------------------------
----


> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an Audi question?  Look for your answer in the Audifans
Knowledgebase!
> http://www.audi-quattro.org/kb ... all contributions welcome!
>