[urq] Best way to remove insulation/sound deadening?

[Rich Letsinger]

I've been helping rip the interior from a friend's urq
also for a cage.  We used liquid hydrogen to freeze
the carpeting and sticky stuff, then it just breaks
off and vacuums out.  It also works well to freeze the
spayed/painted on ceramic stuff inside and out of the
floorboards, then chip it off with a chisel.

You guys are making me think about ripping out my
interior too... ;)

Good luck,
Rich

--- Jon Linkov <jon at audiclubna.org> wrote:
> Started tearing the UrQ apart today, to make it
> ready for a cage, etc.
> 
> Besides the PITA carpet that runs under the dash in
> one piece (making
> removal a b*tch!), I've run into the problem of
> getting the glued-down
> insulation/sound deadening/carpet backing up from
> the sheet metal.
> 
> Any suggestions on BTDT, or just use Goo Gone or
> some other goo remover?
> 
> Oh, and I have many very good '83 interior bits
> available now in good/decent
> condition: entire trunk lining, rear seats, all
> belts and hardware, rear
> armrests/panels. Car had a brown interior. Seats to
> come later (driver
> ripped, passenger ok).
> 
> Contact me if interested.
> 
> jon
> 
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
> http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans
> Knowledgebase!
>
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding
> to the KB ... all contributions welcome!



	
		
__________________________________
Do you Yahoo!?
Friends.  Fun.  Try the all-new Yahoo! Messenger.
http://messenger.yahoo.com/