[urq] valence repair

[Ingo D. Rautenberg]

Brandon,

Found these at Eastwood Company:

http://www.eastwoodco.com/itemdy01.asp?T1=40005&Dep_Key1=plagla

and the one from Deutschland:

http://www.eastwoodco.com/itemdy01.asp?T1=40002&Dep_Key1=plagla

HTH

Of course, if you're just talking cracks, there's surely a fine and cheaper
alternative.  I believe there is a strong and decent plastic repair in a
tube (I may have some at home), but while it may work for you, MY vlalnce
requires more extreme repair techniques.

-Ingo


----- Original Message ----- 
From: "Brandon Rogers" <brogers at terrix.com>
To: <urq at audifans.com>
Sent: Tuesday, March 02, 2004 4:28 PM
Subject: [urq] valence repair


Hey guys-
My poor valence has some damage from Steamboat excursions (despite my 1st
priority - don't mess up the car!) and I'm thinking about ways to repair.
Basically the lower section is cracked in a few places.  Seeing as how I
plan to have a back-up valence (a la Ingo) I will play with this one--cut a
bigger hole for intercooler flow and maybe a hole for more radiator flow -if
necessary  - we'll see....I was thinking maybe using hobby 2-part epoxy and
painting over with touch up.  Anybody know if epoxy will work?  I don't want
the thing to look _too_ bad....

TIA-

Brandon
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!