[urq] single oil filter conversion

[Justin]

Can't help you with the fittings, although I've heard these guys have been
useful on some people's MC swaps:
http://www.adaptall.com/
But, how did you remove the freeze plug out of the block?
(I've been thinking about the same conversion for my WR...)
Justin
----- Original Message -----
From: "Ed Kellock" <ekellock at adelphia.net>
To: <urq at audifans.com>
Sent: Sunday, March 07, 2004 11:33 PM
Subject: [urq] single oil filter conversion


> Just spent a second full weekend tinkering with the urq.  Started as a
simple turbo swap.  Became water-cooled turbo and single oil fitler swap.
Long story.
>
> Anyway, the water cooled K26 and all stock lines, including the freeze
plug fitting are in.  The single oil filter mounting flange is in.  However,
the fittings for the oil cooler are a different size.
>
> Any BTDT available?  Check the archives and didn't find much about it.
Seems that is shouldn't be too difficult to find appropriate fittings to
mate everything up.
>
> Thanks,
> Ed
> Colorado Springs
>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>