[urq] Anyone have sport quattro wiring diagrams?

[Justin]

The size fuse you need is determined either by the supply wire
rating....(how much current the wire is able to supply reliably without melt
down..)...or by the fan motors' current limit....(usaually much higher than
supply wire..)
Too be on the safe side, I always go with a 10 amp lower fuse rating than
the wire requires...
  Did you try this link for sport quattro info?:
http://perso.club-internet.fr/prelais/Web1/quattrokate/Mainmenu.html
Justin
----- Original Message -----
From: livinotte at cox.net
To: <urq at audifans.com>
Sent: Monday, May 03, 2004 5:52 PM
Subject: [urq] Anyone have sport quattro wiring diagrams?


> Hi guys.
>
> My stock coupe quattro radiator fan is rated at 250watts and I noticed
today that the wires and the fan is fried.  I am going to put a 80 amp
fuseable link on but I am not sure what fan to use with my 20vT swap.
>
> The 3b motor fan is rated at 350watts and actually is the one that I have.
I am wondering If this has anything to do with it?
>
> The sport quattro fan is rated at 700 mind blowing watts and is something
I would consider but I wonder what I would have to do with wiring? Stock
wiring is 2.5 gauge aka 12 gauge wires.  With a fuseable link would this
setup be ok???
>
> Does anyone have information on this radiator fan and it's wiring?
>
> For some reason etka doesn't have the sport quattro radiator fan as having
a resistor? Can anyone comment on this?
>
> Thanks
> Josh
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>