[urq] Heatshield Installation Instructions For Intake Manifold andAir Filter Housing, total URQ Content

[Schaible, David]

Spruce part # for fw2000 is actually 05-00948




David Schaible
 

 
 
JRS Pharma LP
2981 Rte 22
Patterson, NY 12563
845.878.3414
 
ALL STATEMENTS IN THIS CORRESPONDENCE ARE CONFIDENTIAL UNLESS OTHERWISE
NOTED
 

-----Original Message-----
From: Bill Bennett [mailto:ur.quattro at verizon.net] 
Sent: Sunday, May 16, 2004 11:40 PM
To: urq at audifans.com
Subject: [urq] Heatshield Installation Instructions For Intake Manifold
andAir Filter Housing, total URQ Content

Yes with pictures, the material used was part number FW2000 from
www.aircraftspruce.com their phone thing is 1-877-477-7823 we did play
with PN 970J and found it brittle, would fall apart when bent. We have
done two cars so far an '86 4000 csq MC turbo and an '83 URQ and the
reduction of heat on the intake manifold is about 60F using a Raytech on
a black spot (raytech will not give an accurate reading on a shiny
surface) and using an Andial intercooler temp guage the intercooler
inlet temp is reduced by over ten degrees. well worth the time( an hour
or so) to install. be sure to face the stainless steel side to the heat
source and the aluminum to the cool side. and wear gloves, or the
stainless steel will give you some really not cool cuts, and before I
forget, check out the pictures
http://home1.gte.net/~res0nyil/heatshield/ Best To All, Bill PS if you
have questions, feel free to ask
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!