[urq] steering rack overhaul - rebuild

[Bill Bennett]

that is an "A" technician job level repair, you would be better off buying a
used rack from a butt ended '87 4000, this is not a job for a novice unless
you want to risk filling your left floor with ATF. "alldata" provides no
repair instructions about replacing the seals on the rack or I would have
sent them to you, and the factory WSM? lots of special tool seal drivers
involved, buy a used rack outta the newest car you can find from a you pull
it place. Honest Regards, Bill
----- Original Message -----
From: "Patrick Carlier" <p.carlier at pandora.be>
To: <quattro at audifans.com>; <urq at audifans.com>
Sent: Wednesday, November 10, 2004 8:09 PM
Subject: [urq] steering rack overhaul - rebuild


> I'm looking for information about this .
>
> I've got a bag of seals and o-rings ,
> but maybe someone has already done it , or has a workshopmanual .
>
> Thx
>
> Pat
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>