[urq] Oil temperature sender location

Brandon Rogers brogers at terrix.com
Tue Nov 16 13:14:11 EST 2004


IMO best place is the factory place - use the factory sender that screws up
into the pump on the front of the block.  You can get a used one off a CGT
and snag its gauge - you know they work together.  Beware there are
different temp ranges so make sure you get proper corresponding
senders/gauges.  ISTR early Audis had a 150C range while later cars have
170C.

hth.

Brandon
'84 ur w/ oil temp gauge


----- Original Message ----- 
From: <Louis-Alain_Richard at computerhorizons.com>
To: <urq at audifans.com>
Sent: Tuesday, November 16, 2004 10:40 AM
Subject: [urq] Oil temperature sender location


> Hi there,
>
> I want to install an oil temp sender (from a 86 4kcsq) on my car, and I
> read somewhere that it can be installed in 2 places : to replace the oil
> pan drain plug or on the oil pump itself.
> Which is the best spot ?
> Is there any no-no I should know before playing with the oil circuitry ?
>
> TIA,
> Louis-Alain
> 1983 Quattro
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!



More information about the urq mailing list