[urq] Removing baked injector inserts from a WX head

Thatcher Hubbard thatcher.hubbard at computer-er.com
Wed Sep 15 16:47:38 EDT 2004


Okay, now I'm starting to worry then.  I can twist them pretty easily but
the never come out any further.  It's like they're press fit in, with a
ridge somewhere on the injector holder.  I guess I'll just cut 'em out with
an Olfa knife.  I'm not worried about damaging the head, just trying to do
it the fast way.  I've had my car off the road long enough, I want to get
this thing back together and going again.

-----Original Message-----
From: Patrick Carlier [mailto:p.carlier at pandora.be] 
Sent: Wednesday, September 15, 2004 3:36 PM
To: Thatcher Hubbard; Louis-Alain_Richard at computerhorizons.com
Cc: urq at audifans.com; urq-bounces at audifans.com
Subject: Re: [urq] Removing baked injector inserts from a WX head

It's 13 mm .
They are very tight sometimes .
Audi used some kind of locktite when they put them in .

Pat


----- Original Message ----- 
From: <Louis-Alain_Richard at computerhorizons.com>
To: "Thatcher Hubbard" <thatcher.hubbard at computer-er.com>
Cc: <urq at audifans.com>; <urq-bounces at audifans.com>
Sent: Wednesday, September 15, 2004 10:34 PM
Subject: Re: [urq] Removing baked injector inserts from a WX head


> If I am right, these inserts are screwed into the head assembly.
> You will need a 12mm (not sure about the size...) allen key to remove
> them.
>
> Louis-Alain
>
>
>
>
>
> "Thatcher Hubbard" <thatcher.hubbard at computer-er.com>
> Sent by: urq-bounces at audifans.com
> 2004-09-15 16:17
>
> To
> <urq at audifans.com>
> cc
>
> Subject
> [urq] Removing baked injector inserts from a WX head
>
>
>
>
>
>
> Hey guys,
>
>   Finally got my head (WX) back from the shop.  I noticed after I had
> picked
> it up though that they had not removed the old injector inserts.  I tried
> with a pair of pliers to pull them out but they just cracked off (at least
> the short lip on the top did).  Should I fashion some sort of hook device
> to
> pull these out or try to cut them out with a good utility knife?  Just
> looking for any BTDT from the list.
>
>
> Thatcher Hubbard
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>






More information about the urq mailing list