[urq] Big brakes for urq with 15 inch wheels

[The Corbs]

Mine are also AP

----- Original Message ----- 
From: "Wolff" <wolff at turboquattro.com>
To: <urq at audifans.com>
Sent: Friday, September 17, 2004 9:28 PM
Subject: Re: [urq] Big brakes for urq with 15 inch wheels


>I think this advertisement is appropriate, check it out:
> http://www.turboquattro.com/lockheed.jpg
> Doesn't that imply that the SQ brakes are in fact Lockheed/AP calipers, or
> did the race cars get special treatment and the SQ got somehting heavier?
> Wolff
>
> ----- Original Message ----- 
> From: "Tony Lum" <tlum at flash.net>
> To: <urq at audifans.com>
> Sent: Friday, September 17, 2004 4:30 PM
> Subject: [urq] Big brakes for urq with 15 inch wheels
>
>
>>
>> I've always kept this link just in case a big pile of cash fell in my 
>> lap.
>>
>> http://www.apracing.com/car/brakekit/data.asp?ref=CP3307-1050
>>
>> That shows a custom 295 MM rotor with a 4 pot AP Racing caliper.
>>
>> One of my on-going projects is to mate a A4 (288 MM) rotor with forged
>> Wilwood Dynalite 4 pot calipers.  The calipers, which are pretty
>> inexpensive (~ $145 each), weigh only 3.5 lbs each vs. the G60's 12
>> lbs.  The Dynalite's lack dust seals, so they would need piston seals
>> replaced once a year.
>>
>> Regards,
>>
>> Tony
>> urq #DA900302
>>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all 
> contributions welcome!