[urq] Subframes bushings r&R procedure

[Bob D]

I think I can still get them for about $175  USD which I think is $223 
CAD(?) for both subframes.
Bob

Martin pajak wrote:

>The best are the solid alumium subframe bushings..
>you woudn't even know they are there (no harshness) and they are very easy
>to install.
>
>HTH
>Martin
>
>P.S.  if you need a set I can get one for around $260 CDN a set (both
>subframes)... Sprongls sell them for $200 CDN per subframe.
>
>
>-----Original Message-----
>From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com]On
>Behalf Of DGraber460 at aol.com
>Sent: 23-Sep-04 15:45
>To: Louis-Alain_Richard at computerhorizons.com; urq at audifans.com
>Subject: Re: [urq] Subframes bushings r&R procedure
>
>
>I have done 2 cars (or 3) with a very similar setup. The sub frame bushings
>are another matter, but the control arms are no too bad.
>
>--
>Dennis
>Denver
>
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all
>contributions welcome!
>
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all contributions welcome!
>
>  
>