Piece is only as long as the door?: [urq] Rocker panel part number

[Martin Pajak]

The wax is also applied between two pieces before spot welding.
When I did the Coupe Q project and tried to seam weld the floor, the stuff
would ooze out when heated by the welding, contaminate the area and prevent
a good weld.. Very frustrating.

Hope this helps.
Martin Pajak

http://www.quattro.ca

1983 Audi Ur-quattro (305,000 km) SOLD
1985 Audi Ur-quattro (203,000 km) Euro spec. import mit 3B ;o)
1986 Audi 4000s quattro (276,000 km) winter car
1971 Porsche 911T (45,000 mi) all original



----- Original Message -----
From: "Bruce Bell" <bbell at surview.com>
To: "'steven j'" <michellepfeiffersx at yahoo.com>; <gmbchef at comcast.net>;
<urq at audifans.com>
Sent: Sunday, April 17, 2005 12:35 AM
Subject: RE: Piece is only as long as the door?: [urq] Rocker panel part
number


> Here are a couple of photos. They measure ~43 5/8" Front of car would be
> left or top respectively. If you have rust, I'd be concerned that there
> could be significant rust inside. Does anyone know if Audi filled these
> with wax?
>
> The other pieces are the inner side members still taped together.
>
> http://pictureposter.audiworld.com/77543/rockers_1.jpg
>
>
> http://pictureposter.audiworld.com/77543/rockers_2.jpg
>
> Bruce


_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!