[urq] ground point 13, FOUND

[Ed Kellock]

I started trimming the wiring harness wrap and have found the other
end of my fried wire.

Ground point 13 is a collection of about 8 ground wires of various
gauge that are all just cut and taped together, then wrapped and
folded over and wrapped into the wiring harness just near the steering
column.

I have digital pix if anyone would like to see and/or host them.

This particular wire runs from fuse box connector G, tab 31 to this
"welded" connection.  I'm going to run a replacement but I wondered if
it would matter if I ran it directly to the multi-tab connector
(kostal connector?) directly on the kick panel.  Seems to me that
might be better if anything.

Any suggestions on what to use to rewrap the harness?  I was going to
just use electrical tape, but thought I'd check to see if there's
something better I could/should use.

Ed


----- Original Message ----- 
From: "Ed Kellock" <ekellock at adelphia.net>
To: <urq at audifans.com>
Sent: Saturday, March 19, 2005 5:08 PM
Subject: [urq] ground point 13


> "welded, wiring harness instrument cluster"
>
> Can anyone tell me where this is more descriptively?
>
> I am chasing it from the fuse box to the point of ground.
>
> Thanks,
> Ed
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection:
http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ...
all contributions welcome!