[urq] UrQ brake booster/servo

[Renneisen, Eric 475]

Yup, the non-A P/N is for the later system that we never got.
 
The BMW P/N for the E23 booster is 34 33 1 152 825.  This part
supercedes the following older P/Ns:
34 33 1 119 875 - expired 2/1980
34 33 1 117 162 - expired 12/1983
I have no idea if those older parts are equivalent for our needs.  They
may just be the Fe version, or there may be some fundamental internal
difference that makes them unusable on the urq.  There are some hose
changes at those same points, so the connections might be wrong for us.
 
Eric Renneisen
'93 S4
'86 urq
'85 urq
Chattanooga, TN
 
-----Original Message-----
From: AUDIJIM at aol.com [mailto:AUDIJIM at aol.com] 
Sent: Friday, April 29, 2005 9:36 AM
To: Renneisen, Eric 475; urq at audifans.com
Subject: Re: [urq] UrQ brake booster/servo


My mistake!
 
Part number 857 612 107 A is listed in ETKA up to VIN >>85-H-902 400.
Part number 859 612 107 is listed in ETKA from VIN 85-J-900 001>>.
 
I mistakenly had 857 for both numbers on my last post on this topic. Do
you know the part number for the BMW booster that has the shorter rod?
 
Thanks,
 
Jim Furdyn
1983 UrQuattro #900170 
1987 4000cs Q
1987 5000cs TQ 279,000 miles
1996 A6 Quattro Avant 
1987 Mercedes Benz Truck model 1219

------------------------------------------------------------------------------CONFIDENTIALITY NOTICE: If you have received this email in error, please immediately notify the sender by e-mail at the address shown.  This email transmission may contain confidential information.  This information is intended only for the use of the individual(s) or entity to whom it is intended even if addressed incorrectly.  Please delete it from your files if you are not the intended recipient.  Thank you for your compliance.  Copyright © 2005 CIGNA
==============================================================================