[urq] 3" exhaust
Brandon Rogers
brogers at terrix.com
Mon Aug 8 11:23:53 EDT 2005
As usual - I may be interested. A 3" copy of the 10V system would be fine
with me - however it must have dual tips, per factory. One of the few
places where looks are very important to me....
all the 3" systems I've seen have one big outlet....
Brandon
----- Original Message -----
From: "Martin Pajak" <martin at quattro.ca>
To: <seiche at shadetreesoftware.com>; <vegener at post7.tele.dk>;
<urq at audifans.com>
Sent: Friday, August 05, 2005 8:43 PM
Subject: Re: [urq] 3" exhaust
> Hi Steve,
>
> With all the 20v and EFI conversions going on, this is probably something
> we
> should look into as a group.
> I do not want a 20v system copy per say, since it is different. However
> using the S2 downpipe I can fit (and have it now) a N/A system with a
> custom
> 2.5" SS flex in place of the CAT.
> Works nice, however, I feel that the engine would breathe a lot better
> with
> a 3" system, especially with a chipped computer.
> Hope there is more interest out there, even for the EFI 10v guys.
>
> Thanks!
> Martin Pajak
>
> http://www.quattro.ca
>
> 1982 Audi Ur-quattro (50,000 mi) new project
> 1985 Audi Ur-quattro (203,000 km) Euro spec. import mit 3B ;o) 2.5"
> exhaust
> :(
> 1986 Audi 4000s quattro (276,000 km) winter car
> 1987 Audi 4000s quattro (195,000 km) hers
>
>
>
> -----Original Message-----
> From: Steve Eiche [mailto:seiche at shadetreesoftware.com]
> Sent: August 5, 2005 23:36
> To: vegener at post7.tele.dk; martin at quattro.ca; 'urq at audifans.com'
> Subject: Re: [urq] 3" exhaust
>
>
> FWIW, I contact BN Pipes about five years ago, and Bernard replied that he
> could supply a 3" turbo back system for a 10V for about $1000 + shipping
> (Considering what the exchange rate is now compared to then, I would guess
> that we are looking at at least $1400 or so now.). Other than the price,
> the problem is that there is no cat and it has a 10V downpipe. He told me
> that he made the system for Hohenester years ago and still has the
> fixtures
> for it. He was not interested in making a 20V version. Also note that the
> 20V system is different not only because of the dual cat setup, but also
> because the pipe and muffler mounts are different on the RR ur quattros.
>
> My advice is to find a good shop that can fabricate a system for you.
> While
> I am still hoping to find a company willing to make a short run of 3"
> exhausts for quattros, I am getting less optimistic. I tried getting some
> interest in a "group" buy a year or two ago, but there was no consensus on
> what people would want (and would pay for), so I dropped the idea.
>
> Steve
>
> Try http://www.bn-pipes.de/
> Claus
> ----- Original Message -----
> From: "Martin Pajak" <martin at quattro.ca>
> To: "Urq" <urq at audifans.com>
> Sent: Thursday, August 04, 2005 3:34 AM
> Subject: [urq] 3" exhaust
>
>
>>> Anyone make it?
>>>
>>> I know Autocraft in Luxemburb makes a beautiful rear box, but with a
>>> 20vt
>>> engine I need a 3" system.
>>>
>>> Let me know
>>>
>>> Thanks!
>>> Martin Pajak
>>
>
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question? Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
More information about the urq
mailing list