[urq] 3" exhaust

[n-engelbert@terrans.net]

Count me in for one as well, just have to figure out what to do as far as
how to standardize the exhaust (copy of 10v exhaust, custom 20vt exhaust,
dual angle cut tips, before/after cat, where does it flare to 3", etc.). 
ISTR Martin posting that the S2 downpipe exits a little further back than
where the stock UrQ downpipe does.  If there are enough 20vt converted
cars running stock manifolds, possibly a DP/exhaust system like the
Stromung could be made available?  Otherwise, a custom downpipe may have
to be made to fit to the 10vt exhaust, which may be the best solution.

Nathan Engelbert
83 UrQ DA900453
89 90q
91 200q20v donor
91 200q20v avant

> Put me on the list, I need a couple of systems......
>
> I figure we would probably need ~10 to make this
> worth while? I know a custom shop in Toronto that
> do great work but my experience listening to the
> issues Stromung had to deal with on the S-car list
> is that it is difficult to keep everyone happy. Of
> course I know how much easier going ur-q owners are
> compared with s-cars owners :^)
>
> On a positive note, my '85 is back from the paint
> shop and I just need to find time and all the pieces
> to put it back together....
>
> cheers, Mike (former s-car owner)
>
> -----Original Message-----
> From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On
> Behalf Of Brandon Rogers
> Sent: Monday, August 08, 2005 11:38 AM
> To: Martin Pajak; seiche at shadetreesoftware.com; vegener at post7.tele.dk;
> urq at audifans.com
> Subject: Re: [urq] 3" exhaust
>
> As usual - I may be interested.  A 3" copy of the 10V system would be
> fine with me - however it must have dual tips, per factory.  One of the
> few places where looks are very important to me....
>
> all the 3" systems I've seen have one big outlet....
>
> Brandon
>
> ----- Original Message -----
> From: "Martin Pajak" <martin at quattro.ca>
> To: <seiche at shadetreesoftware.com>; <vegener at post7.tele.dk>;
> <urq at audifans.com>
> Sent: Friday, August 05, 2005 8:43 PM
> Subject: Re: [urq] 3" exhaust
>
>
>> Hi Steve,
>>
>> With all the 20v and EFI conversions going on, this is probably
>> something we should look into as a group.
>> I do not want a 20v system copy per say, since it is different.
>> However using the S2 downpipe I can fit (and have it now) a N/A system
>
>> with a custom 2.5" SS flex in place of the CAT.
>> Works nice, however, I feel that the engine would breathe a lot better
>
>> with a 3" system, especially with a chipped computer.
>> Hope there is more interest out there, even for the EFI 10v guys.
>>
>> Thanks!
>> Martin Pajak
>>
>> http://www.quattro.ca
>>
>> 1982 Audi Ur-quattro (50,000 mi) new project
>> 1985 Audi Ur-quattro (203,000 km) Euro spec. import mit 3B ;o) 2.5"
>> exhaust
>> :(
>> 1986 Audi 4000s quattro (276,000 km) winter car
>> 1987 Audi 4000s quattro (195,000 km) hers
>>
>>
>>
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
> contributions welcome!
>