[urq] 3" exhaust

[Martin Pajak]

Here is another one showing all side by side:

http://www.audiurquattro.de/rebuild/20v_umbau2002/downpipes.jpg

>From left to right; UrS4, S2 (almost same as RR) and 10v Ur-q.

Hope this helps.
Martin

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com]On
Behalf Of Jack Walker
Sent: August 8, 2005 20:29
To: urq at audifans.com
Subject: Re: [urq] 3" exhaust


Sounds like fun, trying to find something that would be compatible with
all the variations we have.

I've never seen the RR downpipe and exhaust, anyone have an image of
one?

Steve Eiche at one time posted a bunch of downpipes, and Jon Archibald
posted some pictures from his downpipe of his 3B in a 85 Ur not too long
ago that compared to my AAN downpipe right beside it.

http://home.comcast.net/~urq20vt/stuff.html

I'm headed for using the flanges and the wastegate from my AAN donor as
a template, and right after the flange casting go to 3" . The balance of
the single pipe 3" system will be build by a shop here in PDX. The most
obvious problem is over the rear axel. There are really tons of mufflers
and cats available in 3" stock pipes and SS.





Jack Walker

The Irwin-Hodson Company

2838 SE 9th Avenue

Portland, Oregon   97202



jackw at ihco.com



503) 419-4601   Direct Line

503) 807-3807   Cellular Phone



_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!