[urq] Brake Overall

[QSHIPQ at aol.com]

BTTT/BTDT all.  The 200 rotor will fit, but you need to offest the carrier outward.  The 200 rotor fits the 5ktq/200tq 10v turbo cars as a bolt on tho.  The rear carrier and caliper is the same for the '91 200tq and v8, it's only the rotor that is different offset.

The rotor 'hat' for the 91 200 is shallow compared to the v8/S4, so you can't use it on a urq.  For the urq you can bolt on any year v8 rear, any Scar rear thru 96.

Tech tip:  When installing the v8/S4/200 carrier onto an urq, make sure to thoroughly clean the ouside of the urq upright to carrrier mating surface, the footprint is slightly different.  Which means if you have rust buildup on the urq carrier, the rotor will hit the carrier, btdt2.  

Front offset of the 200/v8/S4/S6 rotor are the same, but does *not* bolt to an urq.  G60 5000tq rotors are correct for an urq swap.  Again, the carriers and calipers are interchangeable with the urq/5k 54's, but the rotor offset is different.

HTH

Scott Justusson
QSHIPQ Performance Tuning
Chicago
'84 RS2URQ Project (with 92 S4 rear brakes)
'83 Urq (with 91 v8 rear brakes)



In a message dated 2/3/2005 1:01:43 PM Eastern Standard Time, "Jack Walker" <jwalker at ivey.com> writes:

>Hi Mike,
>
>>From what I understand, and hope is that the UrS4/6 rear complete set up
>calipers, rotors pads, all bolt directly to the rear strut exactly as on
>the G60s calipers do to for the front to our UrQs (but for the fronts we
>need to go to a 5000 rotor).
>Does anyone know if the front/rear rotors from a 91 200 20V the same as
>the UrS4/6? Have heard different options on rotor offset on the rear.
>What are you using for the front brakes?
>I'd replace the hoses with SS. Haley automotive $70 for the fronts when
>I did mine.
>
>Jack Walker
>
><<<
>Message: 5
>Date: Wed, 2 Feb 2005 16:09:07 -0800
>From: Mike Bond <mike at crunkenergydrink.com>
>Subject: [urq] Brake overhaul
>To: urq at audifans.com
>Message-ID:
>      <D26CBFAA-7577-11D9-8F80-000A95A8985C at crunkenergydrink.com>
>Content-Type: text/plain;     charset=US-ASCII; format=flowed
>
>I'm perfoming a brake overhaul on my 83.  For the rear I have UrS4
>calipers, rotors, pads, and hoses, but no carriers?  Anyone have a
>pair?
>
>Mike Bond
>
>1983 UrQ WX
>1981 UrQ WR
>2002 Audi A4 1.8T
>2002 GMC Yukon
>2004 Mitsu Evo RS
><<<<<<
>