[urq] Rear Brake Conversion

[Martin Pajak]

Scott,

Please make it pre '84...
The change to 4kq style caliper took place in '84 model year (same as your
'84 4kq).

Regards
Martin Pajak

http://www.quattro.ca

1983 Audi Ur-quattro (305,000 km) In storage
1985 Audi Ur-quattro (203,000 km) Euro spec. import mit 3B ;o)
1986 Audi 4000s quattro (270,000 km) winter car
1971 Porsche 911T (45,000 mi) all original



-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com]On
Behalf Of QSHIPQ at aol.com
Sent: February 3, 2005 14:24
To: CARDCONSYS at aol.com; urq at audifans.com
Subject: Re: [urq] Rear Brake Conversion


I'd only add that pre 85 urq rear conversions would need the proper
handbrake cable yolk 437 711 097 for the updated ebrake cable swap from
overlap to hook type ends.

Scott Justusson
QSHIPQ Performance Tuning
Chicago
In a message dated 2/3/2005 2:09:16 PM Eastern Standard Time,
CARDCONSYS at aol.com writes:

>       Hear is my post from last year which I hope is in the Knowledge
Base:
>
>UrQ conversion to 1992-1994 S4/S6/V8 Brakes (G60 type)
>19th February 2004, updated 20th September 2004.
>
>To do this conversion you will need the following:
>Front:
>Use S4/S6 G60 Caliper/Bracket Assembly which will fit exactly on the
existing
>UrQ strut mounting holes.
>You cannot use either the standard UrQ disc(437-615-301A) or the S4/S6
>disc(441-615-301A).
>The UrQ disc is very slightly too great a diameter and is not thick enough.
>The S4/S6 disc is the
>correct thickness and diameter but has the wrong 'top hat'/dish/offset
>dimension for the UrQ hub.
>Use disc from 100/200/5000 Quattro PN 447-615-301A/B. There is an
equivalent
>Ate Power disc you might prefer(from Z motors) PN 24.0325-0102.1(525102).
>For pads suggest Hawk HPS compound pad number HB270.
>
>Rear:
>Use the complete S4/S6/V8 setup, calipers and discs. You will also need to
>change to the pair of handbrake cables used on the 1984 and later 4000
Quattro.
>Disc PN 857-615-601.
>Suggested Hawk HPS Pad HB271.
>Handbrake Cables Left 857-609-721D, Right 857-609-721E.
>
>Suggest you discard the S4 intermediate hydraulic hose support bracket on
the
>front caliper(it can interfere with the strut), and replace with a suitable
>SS protected Teflon line directly from the caliper to the body connection.
You
>could use the standard S4 hydraulic hose at the rear but it is better to
>replace it with SS protected Teflon.
>
>Martin Dapot
>83 UrQ

_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!