[urq] rear brake upgrade options

[Mike Fitton]

Okay, so I need calipers, carriers, rotors, and pads from an urScar, 
cables from a 4000 or later urQ, and two 437 711 097 yolks.  And it all 
bolts together more or less flawlessly?

-Cheers!
Mike

Pasqualoni, James E wrote:

>Mike,
>
>I used calipers, carriers, slotted/vented discs and pads from a rear urS4/S6
>brake setup.  You must use e-brake cables from a 4000 with this application.
>
>HTH,
>Jim
>
>-----Original Message-----
>From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
>Of Mike Fitton
>Sent: Thursday, February 03, 2005 1:05 AM
>To: urq at audifans.com
>Subject: [urq] rear brake upgrade options
>
>
>I'm thinking about upgrading my rear brakes.  Not that I feel they're 
>not working hard enough, but I think the parking brake mechanism is 
>seized.  If I have to take that much apart and do that much 
>repair/replacement, I think it would be a great time to update some 
>stuff back there.  I seem to recall hearing that the 20v 200 calipers 
>with V8 rotors was a bolt-on...or something like that.  Can anyone 
>elaborate?  I'll worry about the brake bias later.
>
>-Cheers!
>Mike
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all
>contributions welcome!
>
>  
>