[urq] Dipping vs Blasting

[Lawson, Dave]

Hi Marc,

You write:

>The reason I am leaning towards the rotisserie is that I am most worried
>about the underside of the car, and will need to strip off the undercoating
>and blast the seams and anywhere there is rust. I figure that this would be
>easiest/most safely done on a rotisserie. Also, if I get the pnuematic
>casters, I will be able to roll the shell outside (gravel driveway) for
>blasting and inside for stripping.
>
>The rotissarie is only about $1100, so if I use it for multiple projects, I
>should get my money's worth out of it. I may not strip the interior, but I
>have not yet had a chance to make a detailed inspection of it's condition,
>so we'll see.

Team irry (Tacq) has been busy again, check out his setup

http://pr0nsessd.dyndns.org/qul_irry/tacq_files/PICT1465.JPG

http://pr0nsessd.dyndns.org/qul_irry/tacq_files/PICT1466.JPG

http://pr0nsessd.dyndns.org/qul_irry/tacq_files/PICT1482.JPG

check out all the pics of his latest rebuild at 
http://pr0nsessd.dyndns.org/qul_irry/index-eng.html

For $1100, you could buy a welder, some square stock and build your own rotissarie 
like the one shown and still have some $ in you pocket.

Keep us informed, it's great to hear what others are doing.
-
Dave