[urq] Spongy Brake Pedal

[Ingo Rautenberg]

Bomb?
----- Original Message ----- 
From: "Pasqualoni, James E" <james.pasqualoni at gs.com>
To: "Urq List" <urq at audifans.com>
Sent: Tuesday, January 25, 2005 9:21 AM
Subject: [urq] Spongy Brake Pedal


> Guys,
>
> I am having trouble correcting a spongy brake pedal that does finally does
> finally firm up and grab, albeit close to the floor.  The calipers,
rotors,
> pads, hoses and lines have been replaced.  I am using ATE Blue fluid, and
> the master cylinder and lines have been bled twice.  Rear calipers have
been
> adjusted with the foot on pedal/ratcheting ebrake method.  The pedal gains
> significant resistance after this adjustment, but when the car is driven,
> the pedal becomes spongy again.  My first thoughts were master cylinder,
but
> my understanding is that the pedal would not become firm before hitting
the
> floor if this was the case.
>
> Any BTDT please?
>
> TIA,
> Jim
> _______________________________________________
> Audifans urq mailing list
> Send posts to: mailto:urq at audifans.com
> Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
> Have an urq question?  Check the Audifans Knowledgebase!
> http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
> Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!
>


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.840 / Virus Database: 571 - Release Date: 1/19/2005