[urq] A new urQ owner, and a big problem...

[djdawson2 at aol.com]

I used everything from the WX except the block and head... and some misc to go to a water cooler K24.
Dave 
 
-----Original Message-----
From: Buchholz, Steven <Steven.Buchholz at kla-tencor.com>
To: urq at audifans.com
Sent: Tue, 19 Jul 2005 10:55:22 -0700
Subject: RE: [urq] A new urQ owner, and a big problem...


... if I'm not mistaken you need to either modify the ref pin location
on the MC flywheel or use the WX flywheel, correct?  Which distributor
do you use?

Steve B
San Jose, CA (USA)
> 
> >I would avoid the later MC engine (8.4:1), as this is the route I
> took on one of my cars... and the result was a bit of detonation at
> one specific engine speed.  Still worked fine, however... but made me
> nervous.
> >
> > Steve at Shadetree did the remap of the MAC02 chip for me.
> 
> I currently have the car that Dave's referring to here.  It certainly
> did work fine with just the block and head swapped and the chip
> remapped.  And that engine came with a water cooled K24.  Although,
> Dave's/mine was not nearly as fast as a chipped MC-2 equipped 200.
_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all 
contributions welcome!