[urq] Hub Question

[Pasqualoni, James E]

Hey Patrick,

I used these on my urS6:
http://www.northerneuropeanautomotive.com/Audi%20S4%201992-1994/wheel.html

Very good quality and reasonable for being billet.

HTH,
Jim 

-----Original Message-----
From: urq-bounces at audifans.com [mailto:urq-bounces at audifans.com] On Behalf
Of John Karasaki
Sent: Friday, July 22, 2005 6:07 PM
To: Patrick Miller; urq at audifans.com
Subject: Re: [urq] Hub Question

They hubs have a different offset, but any Audi 5x112 spacer from H&R will
work fine on your urq.

At 04:52 PM 7/22/2005 -0500, Patrick Miller wrote:
>Hubs on an UrQ are basically the same as that of a Type 44, yes?
>I need to use spacers, and I found a set off of a V8 from H&R.  Fitment 
>is correct?
>
>Thanks,
>Fru-T
>_______________________________________________
>Audifans urq mailing list
>Send posts to: mailto:urq at audifans.com
>Manage your list connection: 
>http://www.audifans.com/mailman/listinfo/urq
>Have an urq question?  Check the Audifans Knowledgebase!
>http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
>Have an urq answer? ... Please help others by adding to the KB ... all 
>contributions welcome!

_______________________________________________
Audifans urq mailing list
Send posts to: mailto:urq at audifans.com
Manage your list connection: http://www.audifans.com/mailman/listinfo/urq
Have an urq question?  Check the Audifans Knowledgebase!
http://www.audi-quattro.org/cgi-bin/twiki/view/Audi/UrQuattro
Have an urq answer? ... Please help others by adding to the KB ... all
contributions welcome!